Railblaza Mount (Front) for Yamaha FX (2019+) with Railblaza Light

Shoreline Railblaza Mount (Front) for Yamaha FX 2019+ Waverunner with Railblaza Illuminate IPS Light system*

Made by the jetski fishing experts Shoreline Jetskis, this custom-made mount and light you to mount Railblaza lights and action cameras* on your Yamaha FX series Waverunners! 

Instead of having to have hard-wired navigation lights for your Waverunner, a battery operated system saves time and money, and with the right mount can be useful for the times when the sun is up! 

This mount is a strong stainless steel plate designed for the battery-operated Red/Green Railblaza navigation light for those early starts. When the sun comes up, remove it and convert to a camera mount instantly to get those great action video clips!

Suits all Yamaha FX series Waverunners 2019+ models

*The mount is only recommended for Railblaza lightweight accessories such as their navigation lights and for mounting lightweight action camera such as GoPro.  Do not use an extension boom pole or rod holders as the forces might damage the Yamaha's bonnet lid.

We also recommend you always tether accessories to your ski. Jetcast supplies a GoPro tether that could be suitable for your needs. Simply slip this under the mount when installing. See "seller's other items"

Price shown is for 1 x Shoreline Railblaza Front Mount for Yamaha FX and  Railblaza Illuminate IPS Re/Green light system,  and includes the Railblaza Starport attachment.

For purchasing the mount without the Railblaza light, go to "see seller's other items"

Installation:

You will need a power drill to create the single mounting hole required, plus a 3mm Hex/Allen Key. All hex bolts and nuts are supplied for the quick install

To install, line up the mount on the Yamaha'a storage lid in the final position and mark the position of the hole for mounting.   Use a smaller drill bit to create a pilot hole, then change to a 5.5mm drill bit for the single hole required. It's a simple 5 minute job!

The Railblaza mount uses a 3mm hex /Allen key (not supplied). A drop of threadlock solution is recommended on all of the hex bolts.

The mount can be removed again if transferring to a new compatible ski in the future. The small hole can be filled with silicone if need be.